Stoły próżniowe na zamówienie do mocowania CNC
Custom Vacuum Tables for CNC Workholding
Precision-engineered vacuum clamping solutions based on our proven table series, adapted to your machine, workpiece and manufacturing process.
From custom dimensions and vacuum zones to specialist surfaces, mounting features and connection positions, CNC Solutions can help you specify a vacuum table that fits your application rather than forcing your application to fit a standard table.
Built Around Your Workholding Requirements
Our custom vacuum tables are developed from established designs wherever possible. This allows us to combine proven vacuum distribution and clamping principles with the dimensions, features and configuration required for your machine. Where a standard series is not suitable, we can assess a specialist or fully bespoke solution.
Custom Dimensions
Specify the overall table size, usable clamping area, thickness and machine envelope.
Vacuum Zones
Configure independent zones, circuits and vacuum distribution to suit your workpieces.
Connection Positions
Choose suitable vacuum port locations, connection sizes and hose exit directions.
Mounting Features
Include fixing holes, locating features, recesses and other machine interface requirements.
Surface & Support
Select an appropriate grid, hole pattern, porous surface, sealing system or support layer.
Complete Systems
We can assess the vacuum source, hoses, manifolds, filters and accessories alongside the table.
Choose the Right Vacuum Table Series
The most suitable starting point depends on the material, workpiece thickness, machining operation, leakage conditions and required clamping area. Our quotation form lets you select a preferred series or ask us to recommend one.
RAL & RAL Pro Series
Raster-grid vacuum tables using sealing cord to define the active clamping area. A versatile choice for many CNC machining and fixture applications where a controlled vacuum zone and flexible workpiece positioning are required.
Custom dimensions, grid configurations, zones and connection arrangements can be assessed.
Explore Vacuum Tables →GR Series
Hole-grid tables provide distributed vacuum through a regular hole pattern. They are suitable for a wide range of flat workpieces and can be combined with appropriate rubber mats or adapter layers for the application.
Custom sizes, hole-grid configurations and mounting requirements can be considered.
Hole Grid Setup Guide →GAL Series
A strong starting point for larger or application-specific hole-grid systems where independent vacuum zones and a tailored distribution layout are required.
Particularly relevant where workpiece sizes vary or selected areas need to be isolated.
Explore Vacuum Tables →SEAL Series
Designed for efficient vacuum clamping with a suitable rubber mat system. SEAL-based solutions can be considered for repeat production, plastics, composites and other applications requiring a practical workholding surface.
Custom dimensions and application-specific configurations can be assessed.
View SEAL Example →FAL Series
A fine-hole vacuum surface suited to applications involving very thin, flexible or delicate sheet materials where dense vacuum distribution and a smooth support surface are important.
For breakthrough machining, an appropriate sacrificial or perforated support layer should be considered.
Explore Vacuum Tables →MP / Metapor Series
Microporous vacuum clamping surfaces for applications requiring a finely distributed vacuum effect across the support area. Suitable for specialist thin-sheet and precision workholding requirements, subject to material and process assessment.
Custom sizes and integration requirements can be reviewed.
Explore Vacuum Tables →R, ST & Slimline
Alternative table constructions and low-profile configurations may be suitable where machine clearance, installation height, weight or a particular workholding arrangement is important.
We can assess the appropriate base series and adapt the specification where feasible.
Explore Vacuum Tables →Smart, Heated & Bespoke
For applications requiring specialist functions, integrated features or a non-standard construction, we can review the technical requirements and determine whether an existing platform can be adapted.
Where necessary, a dedicated custom design can be developed.
Discuss a Specialist Project →Let Us Recommend
You do not need to know the correct table series before making an enquiry. Tell us about your material, workpiece dimensions, machining process and available vacuum source, and we can recommend a suitable starting point.
Start Your Enquiry →Engineered to Your Specification
A custom vacuum table involves more than changing its overall dimensions. The following details help us assess the correct construction, vacuum distribution and integration with your machine.
Overall & Usable Dimensions
Length, width, thickness, usable clamping area, installation height and any machine travel restrictions.
Vacuum Distribution & Zones
Number of zones, independent circuits, workpiece coverage and whether unused areas need to be isolated.
Mounting & Machine Interface
Fixing-hole patterns, threaded holes, counterbores, locating features, recesses and machine datum requirements.
Workpiece & Machining Process
Material, thickness, smallest and largest part, cutting forces, breakthrough machining and production method.
Surface & Sacrificial Layers
Rubber mats, sealing cord, adapter mats, porous surfaces and suitable sacrificial or perforated support layers.
Vacuum Source & Accessories
Existing pump or compressed-air supply, required vacuum performance, hose routing, filtration and manifolds.
Vacuum Port Positions & Connections
Vacuum connection placement is an important part of a custom table design. We can assess ports on the long sides, short sides or underside, depending on the table construction, internal vacuum channels and available machine clearance.
Specify the Connection Arrangement
Our quotation form allows you to describe each requested vacuum port, including its position, circuit, connection type and hose exit direction.
- Long side: Side A or Side B, with the preferred position.
- Short side: Side A or Side B, including any clearance restrictions.
- Bottom connection: Where underside routing is required and technically feasible.
- Multiple ports: Separate connections for independent zones or vacuum circuits.
- Connection details: Thread, hose barb, push-fit or manifold requirements.
- Hose exit: Straight, 90° or downward routing, with available clearance.
VACUUM TABLE
Illustrative port positions only. Final locations are subject to the table design.
Important: Not every port position is possible on every vacuum table series. Bottom connections, multiple circuits and non-standard fittings must be assessed against the internal vacuum distribution, table thickness and structural requirements. A drawing showing your preferred positions is particularly helpful.
Typical Custom Vacuum Clamping Applications
Aluminium & Metal Machining
Custom workholding for flat metal components, plates, precision machining and dedicated production fixtures.
Plastics & Composites
Vacuum clamping for plastic sheets, composite panels, technical materials and repeat machining operations.
Thin & Flexible Materials
Fine-hole or porous-surface solutions for thin sheets where distributed support and controlled vacuum are essential.
Large Format CNC
Custom dimensions and zoned vacuum distribution for larger machine beds, panels and variable workpiece sizes.
Inspection & Precision Holding
Specialist clamping where stable positioning, low-profile construction or a particular surface arrangement is required.
Dedicated Production Fixtures
Application-specific vacuum systems incorporating mounting features, repeatable positioning and tailored vacuum circuits.
Matching the Vacuum Source to the Table
The vacuum table and vacuum source should be considered together. The correct solution depends on the effective clamping area, material permeability, leakage, machining forces and whether the operation involves through-cutting.
Existing Vacuum Equipment
If you already have a vacuum pump, side-channel blower or compressed-air vacuum generator, provide its model and performance details. We can assess whether it is suitable for the proposed table and application.
Complete Vacuum Clamping System
If you require a complete solution, we can consider the table together with a suitable vacuum source, hoses, fittings, manifolds, filters and other accessories required for installation.
Breakthrough machining: Cutting through a workpiece can expose vacuum openings and increase leakage. The table series, vacuum source, zone arrangement and sacrificial support layer should be selected with this in mind.
From Enquiry to Custom Manufacture
Share Your Requirements
Complete the quotation form and upload drawings, CAD files or a dimensional specification.
Technical Review
We assess the application, suitable table series, vacuum configuration and any specialist requirements.
Quotation & Drawing
We provide a quotation and, where required, a technical drawing for review and approval.
Manufacture & Delivery
Following approval, the table is manufactured and prepared for delivery to your location.
Ready to Specify Your Vacuum Table?
Complete the form below with as much detail as you have available. You can select a preferred series or ask us to recommend one. Drawings, STEP files, PDFs and dimensional sketches are welcome.